Displays on the screen

This displays the following information:
- time,
- date,
- ambient temperature (this fl ashes if
there is a risk of ice),
- status of doors and boot,
- audio sources (radio, CD, USB port,
jack socket etc.),
- trip computer (refer to the "Instruments
and controls" section).
Warning messages (E.g. "Emisions control system faulty") or information messages (E.g.: Automatic headlamps active") may appear temporarily. These can be cleared by pressing the "ESC" button.
See also:
Boot
Luggage securing rings
Use the 2 side fi xings at the rear, as well as the 6 anchoring rings on the
boot floor and the rear seat backrest, to secure your loads. For safety reasons,
in case of h ...
Programming
Turn thumb wheel 1 to the
"CRUISE" position: the cruise
control mode is selected but is
not switched on (PAUSE).
Set the programmed speed by accelerating
to the required speed,
then ...
Warning lamps
1. With the ignition on, the orange and
red warning lamps come on.
2. With the engine running, these
warning lamps should switch off.
If a warning lamp remains on, refer to
the page concerned. ...






