Cruise control "CRUISE"
1. Selecting/Switching off cruise control
mode.
2. Decrease the programmed value.
3. Increase the programmed value.
4. Cruise control Off/Resume.
In order to be programmed or activated, the vehicle speed must be higher than 25 mph (40 km/h), with at least fourth gear engaged on a manual gearbox (second gear on an automatic gearbox).
See also:
Locking the vehicle with
exterior protection alarm only
Deactivation of the interior
volumetric protection
Switch off the ignition.
Within ten seconds, press button A
until the indicator lamp is lit continuously.
Get out of the vehicle.
Lock o ...
Engine oil level indicator
When the ignition is switched on, the oil level indicator is displayed for several
seconds.
This display indicates normal operating.
A flashing of "OIL" indicates an oil level that i ...
Programming
You can activate or deactivate the
system by means of the multifunction
screen confi guration menu. The system
state is memorised when switching off
the ignition.
The system will be deactivated
...