Repositioning the seat backrest
When repositioning the rear seat backrest:
- Straighten the seat back 2 and secure it.
- Check that the red indicator, located next to the control 1 , is no longer visisble.
When repositioning the seat backrest, take care not to trap the seat belts.
See also:
Diesel injection equipment
Protective cover for HDi 138 engines:
Remove the protective cover by first unclipping at 3, then 1 and 4.
Unclip at 2 by pulling towards you, then lift up.
To refit the protective cover, firstly ...
Interior lamps
Interior lamps
Unclip the transparent cover of the interior lamp to reach the bulb.
Bulb: W 5W
Spotlamp
Detach the cover.
To access the bulb, detach if necessary the partition of the affected s ...
Access to the tools
The towing eye is installed in the boot
under the fl oor.
To gain access to it:
open the boot,
raise the fl oor,
remove the polystyrene storage box,
remove the towing eye from the
hold ...