Operating fault
In the event of a cruise control malfunction, the speed is cleared resulting in fl ashing of the dashes. Have it checked by a CITROËN dealer.
When the cruise control is switched on, be careful if you maintain the pressure on one of the programmed speed changing buttons: this may result in a very rapid change in the speed of your vehicle.
Do not use the cruise control on slippery roads or in heavy traffi c.
On a steep descent, the cruise control will not be able to prevent the vehicle from exceeding the programmed speed.
To avoid any risk of jamming of the pedals:
- ensure that the mat is positioned
correctly,
- never fi t one mat on top of
another.
See also:
Starting
Manual gearbox
Ensure that the gear lever is in the neutral position.
Do not touch the accelerator.
For Diesel engines: Turn the key to the drive position. Wait for the preheater
warning lamp to ...
Air treatment
The incoming air follows various routes
depending on the controls selected by
the driver:
- direct arrival in the passenger compartment
(air intake),
- passage through a heating circuit
(heating ...
Anti-intrusion alarm
Your vehicle may be equipped with an anti-intrusion alarm.
This ensures:
• Exterior perimeter protection by means of detectors on the access points (doors,
tailgate, bonnet) as well as on the el ...