Automatic air conditioning
This system automatically regulates temperature, air flow and air distribution in the passenger compartment according to the temperature selected (for each side, right and left).
It provides an optimum level of comfort regardless of the climatic conditions, by permanent use of the automatic air conditioning mode (press the AUTO button) and with all the vents open.
Having no airflow prevents the air conditioning and the system in general from working.
1 - Automatic operation
This is the normal operating mode.
A press on this control, confirmed
by the display of "A/C" and "AUTO", automatically manages all the 5 following functions
according to the temperature chosen:
- Flow of air.
- Cabin temperature.
- Distribution of air.
- Air conditioning.
- Recycling of air.
To enable the system to operate, all the air vents should be kept open.
To prevent misting of the interior of the vehicle in cold and damp conditions, the use of AUTO mode is recommended.
2 - Adjustment of temperature
on left hand side
3 - Adjustment of temperature
on right hand side
To display the desired temperature,
rotate control 2 or 3:
- To the left to lower the temperature
- To the right to raise the temperature
The difference between the temperatures on the right and on the left cannot be greater than 3.
An adjustment around 21 will provide a temperature that is comfortable. Depending on your requirements, an adjustment between 18 and 24 is normal.
The display HI (high) corresponds
to a demand for maximum heating (above 27).
The display LO (low) corresponds
to a demand for maximum air conditioning (below 15).
Notes:
- When you enter the vehicle, the temperature inside the vehicle may be much
colder (or warmer) than a comfortable temperature. It is no use modifying the displayed
temperature to try to attain the desired level of comfort. The system automatically
strives to compensate this temperature discrepancy as rapidly as possible.
- When starting the engine from cold, in order to avoid distributing too much cold
air, the blower will attain its optimum level gradually.
Manual recalling of one or more functions
All the functions 4, 6 and 7 can be adjusted manually. Display of the function "AUTO" then disappears.
4 - Air conditioning
To stop the air conditioning, press
on the control 4. The symbol "A/C" disappears.
To restart it, press again on the control 4. The symbol "A/C" displays.
5 - Air recirculation
When you press on control 5, the
entry of air from outside is blocked off and the associated symbol is displayed.
This function can also be accessed by pressing the appropriate button on the steering wheel.
While retaining the other settings, this position excludes disagreeable odours or emissions coming from outside. It should be cancelled as soon as possible to prevent misting and to allow fresh air into the cabin.
To deactivate the air recirculation, press again on control 5.
6 - Adjustment of the air distribution
Press the button successively so
that the display shows, in turn, the air flow to:
The windscreen and front side
windows.
The windscreen, front side windows
and passenger footwells.
Passenger footwells.
Central and lateral air vents
and passenger footwells.
Central and lateral air vents.
7 - Air flow
Heater blower speed: press button:
To increase it
To decrease it.
The level of air flow is represented on the display by the progressive filling of the fan blades.
A press on the control 7 deactivates the function "AUTO". To restart it, press again on the control AUTO.
Note: to avoid condensation and poor air quality in the passenger compartment, it is recommended always to maintain a sufficient flow of air.
8 - Demisting - deicing of the windscreen and front side windows
While it is operating, the warning
lamp lights and the symbol appears on the display.
This control is for rapid deicing or demisting of the windscreen, acting automatically on the air blower flow, air distribution, air conditioning and air entry.
To stop it, press again on control 8 or on the control AUTO.
Note: you should not have air recirculation selected.
9 - Demisting - deicing of the rear screen
When this function is working, the
warning lamp comes on and the symbol appears on the display.
This control is for rapid deicing or demisting of the rear screen.
It switches off automatically to avoid excessive consumption of power.
To stop it, press again on the control 9.
Press AUTO to return the system to its automatic function.
See also:
Black panel
System allowing certain displays to be
switched off for night driving.
The instrument panel remains lit with
the vehicle speed and cruise control or
speed limiter information, if in use.
If the ...
Power & dynamics
On the road, the new Citroën C4 combines the highest standards of ride
smoothness and responsive handling for an enjoyable driving experience. The
suspension settings are tailored to the powe ...
Checking levels
Check all of these levels regularly and
top them up if necessary, unless otherwise
indicated.
If a level drops signifi cantly, have the
corresponding system checked by a
CITROËN dealer.
Oil ...