General functions -Audio adjustments
On / Off
With the key in Drive position M, press on control A to switch the radio on or off.
Note: If the radio was on the last time you switched off the ignition, it will resume automatically when you switch on the ignition again.
You will not have to press on control A.
After switching off the ignition, you can still operate the audio system even without the ignition key being present. Simply press on button A. The system will turn itself off after approx.
30 minutes.
Anti-theft system
This radio is coded in such a way as to function only on your particular vehicle. It would be unusable if installed on any other vehicle.
Note: The anti-theft system is automatic and requires no action on your part.
Selection of source
To select either Radio, CD (CD already inserted and Radio source activated), or CD changer source, press on control D.
When you insert a CD it automatically starts being read.
Note: When the radio is switched off, the source selected is memorised.
Volume adjustment
Rotate control A to increase or decrease the sound volume.
You can also increase or decrease the volume using controls 4 and 5 at the steering wheel.
Note:
The sound volume when you switch off the radio will be the same when you switch it on again.
The radio sound volume automatically adjusts to the vehicle speed, provided the “volume adjustment” function is activated.
Temporary sound pause
Press on control 6 at the steering wheel to activate this function.
The sound will be paused, regardless of the source selected.
To restore sound, press on control 6 at the steering wheel or on one of the controls 4 or 5 at the steering wheel.
Sound adjustments
Each press on button F brings up the parameter to be adjusted: choice of predefined sound ambiances, bass, treble, loudness, fade (front/rear sound distribution), balance (left/ right sound distribution) and volume adjusted to vehicle speed.
Press buttons K or N to modify the values for the function displayed.
Note:
The selection of a sound ambiance automatically adjusts bass and treble. These can be modified.
To restore the original adjustments for the musical ambiances, reset bass and treble to zero.
Adjustment of loudness, as well as bass and treble when they are available, are specific to each sound source and to each musical ambiance.
If you leave the audio system unactioned for a few seconds, it will revert to the normal display.
Remark: A superimposition of ambiances, loudness and bass adjustment may cause vibrations/interference and result in poor sound quality.
See also:
Towing your vehicle
On the front bumper, unclip the cover
by pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
Switch on the hazard warning lamps
on the towed vehicle.
Place ...
Programming
Various automatic lighting control
modes are also available according to
the following options:
- guide-me-home lighting,
- automatic lighting. ...
Automatic lighting of hazard
warning lamps
When braking in an emergency, depending
on the deceleration, the hazard
warning lamps come on.
They will switch off automatically the
fi rst time you accelerate.
If they do not, press button A to ...